|
|
Enquiry
|
|
Click on image for larger photo
|
Product Code:
11423
HYDRAULIC PUMP 1 HP,240VOLT 8 LITRE TANK
TWO OUTLET HOSES,1.5M LONG, FITTED WITH
OTC,USA FITTINGS.2 WAY PUMP UP & DOWN
|
|
|
|
|
Please enter a valid quantity |
|
|
|
|
 |
|
|
|
MANUAL LEAVER HYDRAULIC PUMP 240VOLT WITH 8 LITRE TANK
240 VOLT POWER 0.75KW (1 HP) MOTOR FITTED WITH A ELECTTROMAGNETIC FOOT CONTROL
ALSO HAS 2 HOSE OUTLET WITH FITTINGS 1.5 METRES LONG
- 240 VOLT ELECTRIC PUMP WITH 8 LITRE TANK
- PRESSURE GAUGE ON UNIT IS 100MM FACE
- OIL CAPACITY: 7 LITRES; POWER: 0.75KW
- WORKING PRESSURE: LOW PRESSURE 2MPA; HIGH PRESSURE 70MPA
- FLOW METER (LITRES / MINUTE): LOW PRESSURE 5 LITRES MINUTE; HIGH PRESSURE 0.7 LITRES /MINUTE
- 2 HOSE DUAL CIRCUIT ULTRA HIGH PRESSURE 240 VOLT PUMP
- ELECTTROMAGNETIC FOOT CONTROL
SUIT ALL ENERPAC RAMS
EFFICIENT MOTOR - EQUIPPED WITH A SINGLE-PHASE ASYNCHRONOUS MOTOR; 750W WITH ALUMINIUM SHELL, THIS ELECRIC HYDRAULIC PUMP IS ENERGY EFFICIENT, POWERFUL AND DURABLE. HYDRAULIC PUMP WORKING PRESSURE: 7Mpa TO 70Mpa. ROTATE SPEED: 1400R/MIN. FLOW RATE: 0.9LMIN - 5L/MIN.
LARGE CAPACITY TANK - WITH A LARGE FUEL TANK CAPACITY,8 LITRE THE HYDRAULIC POWER PACK IS EFFICIENT. A VISIBLE WINDOW FOR MONITORING THE INSIDE. THE PUMP USES THE 15-46 ANTI-WEAR HYDRAULIC OIL. IT FEATURES COMPACT SIZE, LIGHTWEIGHT, SIMPLE STRUCTURE AND EASE OF USE.
ACCURATE PRESSURE GAUGE - THIS AIR HYDRAULIC PUMP HAS A PRECISE PRESSURE GAUGE, RESISTANT TO SHOCK, HELPING TO OBSERVE THE PRESURE WHEN THE PUMP IS WORKING AT ANY TIME. FROM 2Mpa TO 70Mpa, YOU CAN TRY SLOWLY AND CHOOSE THE RIGHT WORKING PRESSURE YOU NEED.
EFFECTIVE OIL VOLUME - MANAGE THIS SINGLE ACTING HYDRAULIC GEAR PUMP BY A SOLENOID VALVE. THE HIGH-PRESSURE OIL PIPE IS OF HIGH QUALITY AND DURABILITY.
VARIOUS APPLICATION - THE MANUAL HYDRAULIC PUMP CAN BE USED FOR A VARIETY OF HYDRAULIC EQUIPMENT, WORKING ON SEVERAL ASSIGNMENTS SUCH AS LIFTING, PRESSING, BENDING, STRAIGHTENING, CUTTING, ASSEMBLY AND DISASSEMBLY. REDUCE MANUAL WORK AND MAXIMISE WORK EFFICIENCY
STANDARD PUMP FOR MOST SINGLE ACTION APPLICATIONS
- LIGHT WEIGHT AND CARRY HANDLE ALLOWS FOR EASY TRANSPORT OF THE PUMP.
- SINGLE SPEED OPERATION REDUCES CYCLE TIME FOR IMPROVED PRODUCTIVITY..
- THE PUMP IS EQUIPPED WITH PRESSURE GAUGE, WHICH MINIMISES THE RISK OF OVERLOADING AND ENSURES A LONG, DEPENDABLE SERVICE.
- SOLENOID VALVE AND MOTOR CONTROL INTERNAL PRESSURE RELIEF VALVE PREVENTS OVERLOADING.
- EACH PUMP COMES WITH 2 X 1.5 METRE HOSES AND 3/8"NPT MALE COUPLERS
NOTE: WHEN USING 10,000 LBS HIGH PRESSURE HYDRAULICS, EXTREME CARE MUST BE TAKEN WHEN ADAPTING HOSES AND FITTINGS TO THE PUMPS AND RAMS. BECAUSE OF THE HIGH PRESSURE, WHEN USING ADAPTORS TO FIT HOSES TO THE RAMS WE STRONGLY RECOMMEND YOU USE STEEL HIGH PRESSURE FITTINGS BECAUSE BRASS FITTINGS CAN ONLY TAKE UP TO 500PSI & WILL FAIL OR LEAK. A RANGE OF THESE STEEL FITTINGS CAN BE FOUND UNDER (PORTA POWER - FITTINGS) ON OUR WEBSITE UNDER THE ( HYDRAULICS - AGRI ) HEADING.
SOME OF THE MOST USED HIGH PRESSURE FITTINGS ARE:
NOTE: OTC USA HYDRAULIC FITTINGS FEMALE FITTING ON HYDRAULIC RAM PART NO (9796) THE OTC USA FEMALE FITTING
TO SUIT (9796) ON THE END THE HYDRAULIC HOSE IS PART NO (9798) IF MALE & FEMALE USA FITTINGS ARE
REQUIRED PART NO IS (9796/9798)
RAMS WITH USA OR OTC STYLE COUPLING 10000 PSI PRESSURE THREAD 3/8NPT
NOTE: OTC USA HYDRAULIC FITTINGS FEMALE FITTING ON HYDRAULIC RAM PART NO (9796) THE OTC USA FEMALE FITTING
TO SUIT (9796) ON THE END THE HYDRAULIC HOSE IS PART NO (9798) IF MALE & FEMALE USA FITTINGS ARE
REQUIRED PART NO IS (9796/9798)
RAMS WITH ASAIN FITTINGS 10000 PSI PRESSURE THREAD 1/4 NPT
NOTE: ASAIN FITTINGS ARE SMALLER SIZE THAN THE USA STYLE AND ARE ON MOST HYDRAULICS
THAT ARE FROM CHINA.
CHINA FITTINGS: HYDRAULIC RAM END PART NO (10376) 1/4NPT HYDRAULIC HOSE END (10377) 1/4NPT
A HYDRAULIC PRESSURE BUSH TO REDUCE TO 1/4 NPT MALE THREAD USE PART NO ( T9791) OR (30-PRB-0604NSS)
FOR A MALE 3/8 NPT & 1/4 NPT FEMALE THREAD USE PART NO (T9790)
PART NUMBER (30-PRB-06-04N-SS) 3/8 X 1/4 NPT STAINLESS STEEL REDUCER.
PART NUMBER (T9790) 1/4 X 3/8 NPT STAINLESS STEEL REDUCER.
PART NUMBER (T9791) 3/8 X 1/4 NPT STEEL MALE ADAPTOR.
|
View Complete Range:
|
HYDRAULICS - AGRI > PORTA POWER RAMS & KITS*
HYDRAULICS - AGRI > PORTA POWER PUMPS - 240 VOLT*
HYDRAULICS - AGRI > PORTA POWER PUMPS - AIR*
ENGINEER MACHINERY > PORTA POWER RAMS & KITS*
TRACTOR-DOZER PARTS > PORTA POWER RAMS & KITS*
ENGINEER MACHINERY > PORTA POWER PUMPS - 240 VOLT*
TYRE EQUIPMENT & GEAR > PORTA POWER PUMPS - AIR*
PANEL BEATING TOOLS > PORTA POWER RAMS & KITS*
WORKSHOP TOOLS > PORTA POWER RAMS & KITS*
HYDRAULICS - AGRI > HYDRAULIC AIR PUMPS
HYDRAULICS - AGRI > HYDRAULIC PUMPS 240 VOLT
|
|
|
Video:
|
Images
|
|
|
.jpg&view=supp)
|
.jpg&view=supp)
|
|
Click to Enlarge |
Click to Enlarge |
.jpg&view=supp)
|
.jpg&view=supp)
|
|
Click to Enlarge |
Click to Enlarge |
|
|
|
|
|
|
|
|